Automatic and semi-automatic electropneumatic vertical sawing machine with microprocessor to cut from 60° left up to 45° right.

FUNCTION: Once having set the length and quantity of pieces required,by pushing the start cycle button the following steps are carried out: facing cut on the bar and then all the following until the programmed number is reached.

Compliance

Function

A FEW FEATURES:
• Head moves vertically on prismatic guides with adjustable taper gib.
• Double set of gears so as to obtain a high performance.
• Four speed rotation of the blade: 2 speeds by electric motor and 2 speeds with mechanical shift.
• Pneumatic vertical vice.
• Control and programming panel with LCD display with autodiagnostic messages.
• Pneumatic feeder 500mm x (1÷ 99) strokes with decimal nonius.
• Regulation head stroke, according to dimensions of material which has to be cut, is programmed from control panel.
• Adaptive shearing stress control system.
• Wire chip brush for blade cleaning.
• Filter to avoid dissipation radio interferances along line.
• Flashing indicator light in case machine is stopped.
• Control panel fitted inside frame with total protection against electromechanic or electric phenomenons.
• Whole strong structure in electrowelded steelwork predisposed for handling with movement equipment.
• Circular blade HSS DMO 5 Ø 350x32x2.5 for solids or sections.
• Predisposed to mount loading table.
• Service keys, instructions manual for maintenance and spare parts list.

OPTIONALS:
Accessory to be requested only when placing order:
• Digital redout of cutting lenght set ±0,1/500 mm.
• Set of "comb jaws" for bundle cutting (max mm 70x70).
• Special vice to reduce restpiece.
• Set of "comb jaws" (max mm 70x70) when equipped w/restpiece reduc.
• Spindle speed 30/60/90/180 rpm instead of standard 15/30/45/90 rpm.
• Supplementary foot-pedal control w/emergency stop.


Optionals upon request:

• Supplementary pneumatic vice.
• Loading table K35 for "comb jaws" (componable modules 1500 mm).
• Circular Blade HSS DMO 5 350x32x2,5 mm for solids and section
• Adapter for unloading tables
• Emulsible oil Lt. 5
• Roller tables:
  - K35 loading series (componable modules 1500 mm)
  - K35 unloading series (componable modules 1500-3000-4500-6000 mm)